manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 227

Installing IP500/IP500 V2

Page 227

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

System Components: IP500 Base Cards

10.3.6 Digital Station

This card is used to add digital station (DS) extension ports to an IP500 and IP500 V2 control unit. It provides 8 RJ45 DS
extension ports for use with Avaya digital phones. A further 4 RJ45 ports are provided for trunk connections when an
IP500 trunk card is fitted to this card. 

·

Supports 
Provides 8 

DS

 ports for 

digital stations

 (except 3800, 4100,

4400, 7400, M and T-Series). 

·

IP500 Control Unit: 

·

IP500 V2 Control Unit: 

·

Maximum per Control Unit: 3 per control unit. 

·

IP500 Trunk Card Support: 

 1.

Port Type

Ports

Features

Digit Station

1 to 8

Provides 

DS

 ports for 

digital stations

 (except 4100, 4400, 7400, M and T-Series).

LEDs

·

Green Flashing = Phone detected.

·

Green On = Phone active.

·

LED1 is also used for base card status: 

·

Red On = Error

·

Red Slow Flash = Initializing.

·

Red Flash every 5 seconds = Card okay.

·

Red Fast Flash = System shutdown.

Optional Trunk
Card Ports

9 to 12

The card can be fitted with one trunk daughter card of any type. The trunk daughter card
then uses ports 9 to 12 on the base card for its trunk connections.

Port LEDs

LED use depends on the type of daughter card installed on the base card:

·

LED 9 is also used for daughter card status.

·

Red On = Error

·

Red Slow Flash = Initializing.

·

Red Flash every 5 seconds = Card okay.

·

Red Fast Flash = System shutdown.

Analog Card

·

Green on = V1: Card installed. V2: Line connected to the port
but idle.

·

Green flashing = Line in use. 

PRI Card

·

Off = No trunk present.

·

Green on = Trunk present.

·

Green flashing = Trunk in use.

·

Red/Green Fast Flash (port 9) or Green Fast Flash (port
10) = Alarm indication signal (AIS) from the trunk remote end. 

·

Red with Green Blink (port 9) or Green Blink (port 10) =
Port in loopback mode (set through IP Office System Monitor).

BRI Card

·

Off = No trunk present.

·

Green on = Trunk present.

·

Green flashing = Trunk in use.

Name

Description

SAP Code

IPO 500 Extn Card Dgtl Sta 8

IP Office 500 Extension Card Digital Station 8

700417330

IPO IP500 Extn Card Dgtl Sta 8 TAA

" 

Trade Agreements Act

 compliant variant.

700501512

 

393

48

393

48

421

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands