manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 218

Installing IP500/IP500 V2

Page 218

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

IP500 Legacy Card Carrier Base Card

This card allows various 

IP400 trunk cards

 and 

IP400 VCM cards

to be used. The front of the card includes panels that can be removed
to match the trunk card fitted.

·

This card does not accept any IP500 trunk daughter card.

·

Maximum: 2 per control unit. 

·

IP400 Cards Supported: The following cards are supported. 

 PRI T1
 Dual PRI T1
 PRI 30 E1 (1.4)
 Dual PRI E1

 PRI 30 E1R2 RJ45
 Dual PRI E1R2 RJ45
 BRI-8 (UNI)
 ANLG 4 Uni (US only)

 VCM 4
 VCM 8
 VCM 16
 VCM 24
 VCM 30

IP500 4-Port Expansion Base Card

This card adds an additional 4 expansion ports for external expansion modules. The
card is supplied with four 2m yellow interconnect cables. 

·

This card does not accept any IP500 trunk daughter card.

·

Maximum: 1 per control unit (Right-hand slot 4 only). 

·

Supported Expansion Modules: The following external expansion modules are
supported: 

·

IP500 Analogue Trunk Module

·

IP500 BRI So Module

·

IP500 Digital Station Module

·

IP500 Digital Station Module A

·

IP500 Digital Station Module B

·

IP500 Phone Module

·

IP400 Digital Station V2 Modules

·

IP400 Phone V2 Modules

IP500 BRI Combination Card

This card provides 6 digital station ports (1-6), 2 analog extension ports
(7-8) and 2 BRI trunk ports (9-10, 4 channels). The card also includes
10 voice compression channels. 

·

This card has a pre-installed 

IP500 BRI trunk daughter card

. 

·

Maximum: 2 combination cards per IP500 V2 control unit,
regardless of type. Not supported by IP500 control units. 

·

IP Office Basic Edition - Norstar Mode and IP Office Basic Edition
systems are limited to a maximum of 12 BRI channels using BRI
Combination and or BRI trunk daughter cards.

IP500 ATM Combination Card/IP500 ATM Combination Card V2

This card provides 6 digital station ports (1-6), 2 analog extension ports
(7-8) and 4 analog trunk ports (9-12). The card also includes 10 voice
compression channels. 

·

This card has a pre-installed 

IP500 analog trunk daughter card

.

·

Maximum: 2 combination cards per IP500 V2 control unit,
regardless of type. Not supported by IP500 control units. 

·

The analog phone ports do not include a ringing capacitor. Where
this is a requirement, connection should be via a Master socket
containing ringing capacitors. 

·

If fitted with an IP500 Analog Trunk daughter card, during power
failure phone port 8 is connected to analog trunk port 12.

230

30

31

220

224

29

222

29

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands