manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 330

Installing IP500/IP500 V2

Page 330

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.11.48 9621G

·

This phone is supported by the IP Office Release 8.0 Q1 2012 Service Pack and higher. The voice activated dialing
and USB features are not supported. 

·

The previous restrictions against using the IP Office system as the HTTP file server for this type of phone have been
removed. 

The phones support 24 programmable buttons which are displayed as touchscreen options. These can be used for call
appearance functions and other IP Office features. In addition the phone supports a home screen on which the user can
add up to 8 icons for programmable functions in addition to those icons present through installation configuration.

These phones do not support any button modules. 

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands