manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 404

Installing IP500/IP500 V2

Page 404

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.16.2 Upgrade Licenses

Existing IP Office systems being upgraded to IP Office Release 6.0 or higher may require a software upgrade license. 

·

New IP500 V2 Systems 
The behavior of new IP500 V2 systems depends on the level of software installed when the first call is made as
follow:

·

Pre-IP Office Release 8.0(46) or IP Office Release 8.1(52) 
For 90 days from its first call, a new IP500 V2 control unit can run any IP Office Release supported on a IP500
V2 system without requiring an upgrade license. The highest level run is written into the control unit's memory
(not the SD card) and becomes a permanent entitlement for that control unit. After 90 days, the IP500 V2 may
require an upgrade license if upgraded to a software release higher than any it has run during the initial 90 day
period. 

·

IP Office Release 8.0(46), IP Office Release 8.1(52) and higher 
Systems installed with firmware 8.0(46) or 8.1(52) or higher have no entitlement period after their first call.
For those systems, even if in their first 90 day period, any subsequent upgrade to a higher major or minor
release will require a software upgrade licence to be added to the system.

·

! 

Warning 

Systems upgraded without the appropriate license will display "No license available" and will not allow any
telephony functions.

·

Software Upgrade 
Existing IP Office systems being upgraded to IP Office Release 6.0 or higher require an upgrade license. 

·

IP Office Basic Edition mode systems are automatically configured with either 48 or 100 users and so
cannot use a Small System Upgrade License. 

·

IP Office standard mode systems being upgraded to IP Office Release 8.0 or higher also require a 

Essential Edition

 system license in order to operate. A virtual Essential Edition license is

automatically added to the system configuration in response to the addition of a valid upgrade license.

·

Small System Upgrade License: IPO R9 UPG SML ADI LIC - 275670. 
This license can be used to upgrade systems with up to 32 users and no external expansion modules. 

·

Large System Upgrade License: IPO R9 UPG ADI LIC - 275669. 
This license can be used to upgrade system with more than 32 users or with external expansion modules.

403

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands