Ashida ADR241B, Instruction Manual

Page: 188 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 188 of 272
I2>1 Curve
IEC S Inverse 1
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired I2>1 Curve can be set i.e. (Any of
the following Curve Selection IEC S Inverse 1 / IEC S Inverse 2
/ IEC V Inverse / IEC E Inverse / IEC LT Inverse / DT/ IEEE M
Inverse / IEEE V Inverse / IEEE E Inverse / IEEE Inverse /
IEEE ST Inverse and C12 User Defined).
Press the Left arrow key (

) to move to the next option.
tI2>1 DT Delay
001.00s
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired tI2>1 DT Delay can be set .
The setting range is from 000.00 to 100.00s in step of 0.01s.
Press the Left arrow key (

) to move to the next option.
I2>1 tRESET
DT
Read-only Setting
I2>1 tRESET is fixed i.e. DT (Definite Time).
Press the Left arrow key (

) to move to the next option.
tI2>1tRESETDelay
001.00s
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired tI2>1tRESETDelay can be set .
The setting range is from 000.00 to 100.00s in step of 0.10s.
Press the Left arrow key (

) to move to the next option.
I2>1 2nd Hrm BLK
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired I2>1 2nd Hrm BLK function can
be set i.e. Disabled / Enabled.
Press the Left arrow key (

) to move to the next option.
I2>2 Enable
Yes
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired I2>2 Enable function can be set