Ashida ADR241B, Instruction Manual

Page: 162 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 162 of 272
Press the Left arrow key (

) to move to the next option.
50 BF_I
100%
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired 50 BF_I can be set.
The setting range is 5% to 100% in step of 1%
Press the Left arrow key (

) to move to the next option.
50 BF Reset
CB Open
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired 50 BF Reset can be set i.e. CB
Open / CB Open+I< / I<
Press the Left arrow key (

) to move to the next option.
Active Group
G1
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Active Group can be set i.e.
G1/G2/G3/G4
Press the Left arrow key (

) to move to the next option.
DR Pre-Trig time
25%
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired DR Pre-Trig time can be set.
The setting range is 10% to 90% in step of 5%
Press the Left arrow key (

) to move to the next option.
LocalCntrlEnable
No
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Local Control Enable can be set
i.e. Yes / No
Press the Left arrow key (

) to move to the next option.
ETH Protocol
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired ETH Protocol can be set i.e.