Ashida ADR241B, Instruction Manual

Page: 175 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 175 of 272
The setting range is from 00.010 to 10.000 in step of 0.005.
Press the Left arrow key (

) to move to the next option.
3Io>1 Curve
IEC S Inverse 1
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired 3Io>1 Curve can be set i.e. (Any
of the following Curve Selection IEC S Inverse 1 / IEC S
Inverse 2 / IEC V Inverse / IEC E Inverse / IEC LT Inverse /
DT/ IEEE M Inverse / IEEE V Inverse / IEEE E Inverse / IEEE
Inverse / IEEE ST Inverse and C12 User Defined).
Press the Left arrow key (

) to move to the next option.
t3Io>1 DT Delay
001.00s
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired t3Io>1 DT Delay can be set . The
setting range is from 000.00 to 100.00s in step of 0.01s.
Press the Left arrow key (

) to move to the next option.
3Io>1 tRESET
DT
Read-only Setting
3Io>1 tRESET is fixed i.e. DT (Definite Time).
Press the Left arrow key (

) to move to the next option.
t3Io>1tRESETDlay
001.00s
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired t3Io>1tRESETDlay can be set .
The setting range is from 000.00 to 100.00s in step of 0.10s.
Press the Left arrow key (

) to move to the next option.
3Io>1 2nd HrmBLK
Disabled
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired 3Io>1 2nd HrmBLK function can
be set i.e. Enabled / Disabled.
Press the Left arrow key (

) to move to the next option.