Ashida ADR241B, Instruction Manual

Page: 181 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 181 of 272
arrow key (- /

) the desired IECLP>1 can be set .
The setting range is from 2% to 250% in step of 1%.
Press the Left arrow key (

) to move to the next option.
IECLP>1 TMS
00.100
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired IECLP>1 TMS can be set .
The setting range is from 00.010 to 10.000 in step of 0.005.
Press the Left arrow key (

) to move to the next option.
IECLP>1 Curve
IEC S Inverse 1
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired IECLP>1 Curve can be set i.e.
(Any of the following Curve Selection IEC S Inverse 1 / IEC S
Inverse 2 / IEC V Inverse / IEC E Inverse / IEC LT Inverse /
DT/ IEEE M Inverse / IEEE V Inverse / IEEE E Inverse / IEEE
Inverse / IEEE ST Inverse and C12 User Defined).
Press the Left arrow key (

) to move to the next option.
tIECLP>1 DT Delay
001.00s
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired tIECLP>1 DT Delay can be set .
The setting range is from 000.00 to 100.00s in step of 0.01s.
Press the Left arrow key (

) to move to the next option.
IECLP>2 Enable
Yes
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired IECLP>2 Enable function can be
set i.e. Yes / No.
Press the Left arrow key (

) to move to the next option.
IECLP>2
0100%
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired IECLP>2 can be set .
The setting range is from 5% to 3000% in step of 1%.