Ashida ADR241B, Instruction Manual

Page: 270 / 272

Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/TC
Rev No. : 06
Page No. : 270 of 272
ADR241B
B1 – B6 Opto I/P-In5
B1 – B7 Opto I/P-In6
C4 – C5 Opto I/P-In7
C6 – C7 Opto I/P-In8
11.6 Testing of Binary Output
Output Contact Test:
1. Assign Relay OUT1 to OUT8 for any Status input i.e. In1 to In8
2. Then Apply voltage to respective Status input so the respective relay is operates.
3. After tripping, check continuity in between NO and C output contact terminal.
4. After the Remove voltage of status input respective relay is reset.
5. Again check the continuity in between NO and C output contact terminal.
Binary Output Terminals Binary Output
C8 – C9 OUT 1
C10 – C11 OUT 2
C12 – C13 – C14 OUT 3
C15 – C16 – C17 OUT 4
B8 – B9 OUT 5
B10 – B11 OUT 6
B12 – B13 OUT 7
B14 – B15 OUT 8
11.7 LED Test
1. Assign LED-L1 to LED-L8 for any Status input i.e. In1 to In8
2. Then Apply voltage to respective Status input so the respective LED is operates.
3. After the switch off voltage of status input respective LED is off