Ashida ADR241B, Instruction Manual

Page: 160 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 160 of 272
RS485
Press the Left arrow key (

) to move to the next option.
Set RP Parity
None
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Rear Port Parity can be set i.e.
None / Even / Odd
Press the Left arrow key (

) to move to the next option.
Set RP Baud Rate
9600
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Rear Port Baud Rate can be set.
The setting range is 9600 – 57600. (i.e. 9600,14400, 19200,
28800, 38400 and 57600)
Press the Left arrow key (

) to move to the next option.
Frequency
50Hz
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Frequency can be set i.e. 50Hz /
60Hz.
Press the Left arrow key (

) to move to the next option.
Ph CT Secondary
1A
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Ph CT Secondary can be set i.e.
1A / 5A.
Press the Left arrow key (

) to move to the next option.
Ph CT Primary
0100
Editable Setting
By using the Plus / Up arrow key (+ /

) or the Minus / Down
arrow key (- /

) the desired Ph CT Primary can be set.
The setting range is 10 to 5000 A in step of 10A
Press the Left arrow key (

) to move to the next option.