Ashida ADR241B, Instruction Manual

Page: 71 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/PC-SI
Rev No. : 06
Page No. : 71 of 272
3.7.2 Communicating with Device
Once the communication settings are complete, then Device can communicate using
ASHIDA Relay Talk System Version2.The RTV2 internally uses a separate communication
driver to communicate with the device. This communication driver communicates with the
device using communication parameters (e.g. com port, baud rate, parity) supplied in device
connection. Status of this driver is reflected in bottom status bar at the rightmost corner.
Figure 28: Offline/Online status
It is 'offline' in red background at the start of the system & turns to 'online' in green
background, once the driver successful loaded. No communication with the device is
possible till the driver is successfully started & is 'online’. Select the device and then click on
Connect button.
Figure 29: Connect to device
After successful communication device name will turn into green colour.
3.8 Settings
3.8.1
To View Settings files from Device
Stored settings can see under Settings node like 000.set etc.
To read the settings from device double click on Settings file, then following settings menu
will appear on screen.