Ashida ADR241B, Instruction Manual

Page: 32 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/I&S
Rev No. : 06
Page No. : 32 of 272
X. Power Supply
Immunity Test
IEC60255-11 &
IEC61000-4-11 : DC voltage dip:
40% dip 200ms and 70% for 500ms for DC
10 & 20ms without loss of protection for DC
30ms, 50ms, 100ms, 200ms, 300ms, 0.5s, 1s and
5s with temporary loss of protection for DC
: AC voltage dip :
10, 20ms without loss of protection for AC
50ms, 100ms, 200ms, 0.5s, 5s with temporary loss
of protection
XI.
Conducted &
Radiated
frequency
Emission Test IEC60255-25,
IEC60255-26
(ed3)
: Conducted
Frequency Range
0.15 – 0.5 MHz
0.5 – 30 MHz
EUT Condition
Limit
79 dB/µV (Quasi peak)
66 dB/µV (Average)
73 dB/µV (Quasi peak)
60 dB/µV (Average)
Energized
: Radiated
Frequency Range
30 MHz – 230 MHz
230 MHz – 1000 MHz
EUT Condition
Limits
50 dB (µV/m)
57 dB (µV/m)
Energized
Insulation Tests:
I. High Voltage
Test
IEC60255-27 : At 2kV 50Hz
a) between all terminals connected together and
case earth for 1 minute
b) Between independent circuits with case earth
for 1 minute.
II. Impulse Voltage
Test
IEC60255-27
Test Voltage
Energy
Polarity
No. of impulses
EUT Condition
5kv, 1.2/50 µSec
0.5 J
+ve and –ve
3 on each polarity
Non Energized
III. Insulation
Resistance
IEC60255-27 :
≥
100M
Ω
@ 500V DC
Environmental tests:
I.
Cold test : IEC-60068-2-1
II. Dry heat test : IEC-60068-2-2
III. Damp heat test, steady state : IEC-60068-2-78
IV. Change of Temperature : IEC-60068-2-14