Ashida ADR241B, Instruction Manual

Page: 155 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 155 of 272
50 BF Delay, 50 BF_I, 50 BF Reset, Active Group, DR Pre-Trig
time, Local Ctrl Enable and IEC61850.
Press the Plus / Up arrow key (+ /

) to move to the next option.
Phase Overcurrent
Password protected window for “Phase Overcurrent” setting
i.e. IP>1 Enable, IP>1, IP>1 TMS, IP>1 Curve, tIP>1 DT Delay,
IP>1 tRESET, tIP>1 tRESET Delay, IP>1 2nd Hrm BLK, IP>2
Enable, IP>2, tIP>2 Delay and IP>2 2nd Hrm BLK.
Press the Plus / Up arrow key (+ /

) to move to the next option.
Ground OC
Password protected window for “Ground OC” setting i.e. IE>1
Enable, IE>1, IE>1 TMS, IE>1 Curve, tIE>1 DT Delay,
IE>1tRESET, tIE>1tRESET Delay, IE>1 2nd Hrm BLK, IE>2
Enable, IE>2, tIE>2 Delay and IE>2 2nd Hrm BLK.
Press the Plus / Up arrow key (+ /

) to move to the next option.
Residual OC
Password protected window for “Residual OC” setting i.e.
3Io>1 Enable, 3Io>1, 3Io>1 TMS, 3Io>1 Curve, t3Io>1 DT
Delay, 3Io>1 tRESET, t3Io>1 tRESET Dlay, 3Io>1 2nd
HrmBLK, 3Io>2 Enable, 3Io>2, t3Io>2 Delay and 3Io>2 2nd
HrmBLK.
Press the Plus / Up arrow key (+ /

) to move to the next option.
COLD LOAD
Password protected window for “COLD LOAD” setting i.e.
Cold load Enable, t_CLP Timer, ICLP>1 Enable, ICLP>1,
ICLP>1 TMS, ICLP>1 Curve, tICLP>1 DT Delay, ICLP>2
Enable, ICLP>2, tCLP>2 Delay, IECLP>1 Enable, IECLP>1,
IECLP>1 TMS, IECLP>1 Curve, tIECLP>1 DT Delay, IECLP>2
Enable, IECLP>2, tIECLP>2 Delay, 3IoCLP>1 Enable,
3IoCLP>1, t3IoCLP>1 TMS, 3IoCLP>1 Curve, t3IoCLP>1DT
Delay, 3IoCLP>2 Enable, 3IoCLP>2 and t3IoCLP>2 Delay.
Press the Plus / Up arrow key (+ /

) to move to the next option.
NPS Overcurrent
Password protected window for “NPS Overcurrent” setting
i.e. I2>1 Enable, I2>1, I2>1 TMS, I2>1 Curve, tI2>1 DT Delay,
I2>1 tRESET, tI2>1tRESETDelay, I2>1 2nd Hrm BLK, I2>2