Ashida ADR241B, Instruction Manual

Page: 203 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 203 of 272
Press the Right arrow key (

) to move to the next option.
I>1 ABCN I< ABC
I>13I0 I>1 I2
This window will show trip flag of Phase O/C, Ground OC
(E/F), Residual OC (3Io), Negative phase Sequence (NPS) OC
and Under Current. (For Stage 1)
NOTE : This window can be seen if Fault occurs in any of
these protection function
Press the Up arrow key (

) to move to the next option.
I>2ABCN
I>23I0 I>2 I2
This window will show trip flag of Phase O/C, Ground OC
(E/F), Residual OC (3Io) and Negative phase Sequence (NPS)
OC (For Stage 2)
NOTE : This window can be seen if Fault occurs in any of
these settings
Press the Up arrow key (

) to move to the next option.
IN1 IN2 IN3 IN4
CLP BC CBF TH T
This window will show trip flag of Under Current and input
status flag (IN1, IN2, IN3, and IN4, CLP – Cold Load Pickup,
BC – Broken Conductor, CBF – CB Fail, TH – Thermal Trip,
and T – CB Trip).
NOTE : This window can be seen if Fault occurs in any of
these settings
Press the Up arrow key (

) to move to the next option.
A = 00000 B = 00000
C = 00000 N = 00000
This window will show Primary Fault Current values.
Press the Up arrow key (

) to move to the next option.
I1 = 00000 I2 = 00000
3I0 = 00000
This window will show Primary Fault Current values.
Press the Up arrow key (

) to move to the next option.
a = 000.00 b = 000.00
c = 000.00 n = 000.00
This window will show Secondary Fault Current values.
Press the Up arrow key (

) to move to the next option.