Ashida ADR241B, Instruction Manual

Page: 157 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/UG
Rev No. : 06
Page No. : 157 of 272
Press the Plus / Up arrow key (+ /

) to move to the next option.
RECLOSING
Password protected window for “RECLOSING” i.e. Reclosing,
Dead Time 1, Dead Time 2, Dead Time 3, Dead Time 4, and
Reclaim Time.
Press the Plus / Up arrow key (+ /

) to move to the next option.
C12-User Define
Password protected window for “C12-User Define” i.e. Set T1,
Set M2, Set T2, Set M3, Set T3, Set M4, Set T4, Set M5 and Set
T5
Press the Plus / Up arrow key (+ /

) to move to the next option.
CB Trip
Press the Left arrow key (

) to operate the CB
Press the Plus / Up arrow key (+ /

) to move to the next option.
CB Close
Press the Left arrow key (

) to close the CB
Press the Plus / Up arrow key (+ /

) to move to the next option
IP Configuration
Password protected window for “IP Configurtion” setting. i.e.
IP address, Subnet Mask, Default Gateway, Pri. SNTP, Sec
SNTP, GMT and IED Name.
Press the Plus / Up arrow key (+ /

) to move to the next option
MEASUREMENT
This window shows the first window of Main Menu.
8.3.3 MEASUREMENT
8.3.3.1 To View – MEASUREMENT
MEASUREMENT
This menu is to view the measured and derived actual load
current as per CT Primary and Secondary current selection,
I2/I1 Ratio and Thermal State.
Press the Right arrow key (

) to move to the next option.