Ashida ADR241B, Instruction Manual

Page: 124 / 272

ADR241B
Doc ID : ADR241B-DO_IM_01
Ref ID : ADR241B/IM/SS
Rev No.
: 06
Page No. : 124 of 272
16. tIECLP>1DT Delay 1.00 Sec 0.00 to 100.0s in step of 0.01s
This setting is used to set the time-delay for the Definite Time (DT) setting if selected for first stage
Ground over current (Measured) element.
17. IECLP>2 Enable Yes Yes/No
This setting determine to enable (turn on) or disable (turn off) the Ground over current (Measured)
function stage 2
18. IECLP>2 100% 5 to 3000 % in step of 1%
This setting determines Pick-up setting for second stage Ground over current (Measured) element.
19. tIECLP>2 Delay 0.10 Sec 00.0 to 100 sec in step of 0.01Sec
This setting for the time-delay for the definite time setting if selected for second stage Ground over
current (Measured) element.
20. 3IoCLP>1 Enable Yes Yes/No
This setting determine to enable (turn on) or disable (turn off) the residual over current (3Io)function
stage 1
21. 3IoCLP>1 100% 2% to 250% in step of 1%
This setting determines Pick-up setting for first stage Residual over current (3Io) element.
22. 3IoCLP>1TMS 1.00 0.01 to 10.0 in step of 0.005
This setting for the time multiplier setting to adjust the operating time of the IDMT characteristic.
23. 3IoCLP>1Curve IEC S Inverse 1 IEC S Inverse 1 / IEC S Inverse 2 / IEC V
Inverse / IEC E Inverse / IEC LT Inverse /
DT / IEEE M Inverse / IEEE V Inverse /
IEEE E Inverse / IEEE Inverse / IEEE ST
Inverse / C12 User Defined
This setting determines the tripping characteristic for the first stage Residual over current (3Io) element.
24. t3IoCLP>1DT Delay 1.00 Sec 0.00 to 100.0s in step of 0.01s
This setting is used to set the time-delay for the Definite Time (DT) setting if selected for first stage
Residual over current (3Io) element.
25. 3IoCLP>2 Enable Yes Yes/No
This setting determine to enable (turn on) or disable (turn off) the Residual over current (3Io)function
stage 2
26. 3IoCLP>2 100% 5 to 3000 % in step of 1%
This setting determines Pick-up setting for second stage Residual over current (3Io) element.
27. t3IoCLP>2 Delay 0.10 Sec 00.0 to 100 sec in step of 0.01Sec
This setting for the time-delay for the definite time setting if selected for second stage Residual over
current (3Io) element.
6.7 I2/I1> (46BC)
Sr. No Parameter Defaults setting Setting / Ranges
1. Password 0000 0000 to 9999
This setting specifies to enter the set password
2. I2/I1>1 Enable No Yes/ No
This setting is used to disable or enable the first stage of broken conductor function.
3. I2/I1>1 20% 5% to 100% in step of 1%