Arthrex AR-3210-0006, Instructions For Use Manual

Page: 17 / 384

Initial Startup
9
EN
4 Initial Startup
Delivery inspection Always check all parts and accessories of the device immediately after receiving
the shipment. The manufacturer considers only replacement claims that have
been immediately submitted or reported to a sales representative or an autho-
rized service company.
WARNING!
The video lens is supplied non-sterile and must be thoroughly cleaned and disin-
fected prior to first use and before each further use (chapter 6 Reprocessing and
Maintenance, page 13). If the video lens is used without sterile cover, it must be
sterilized after disinfection (chapter 6 Reprocessing and Maintenance, page 13)!
4.1 Connecting video lens to a C-mount camera
Insert the video lens with the threaded connection into the threaded mounting
of the camera head (
A ). Turn the video lens clockwise up to the stop ( B ). The video
lens is now fixed firmly to the camera head and ready for connecting to the en-
doscope (Fig. 4-1). To disconnect the video lens from the camera head, proceed in
reverse order.
4.2 Connection of the video lens with the endoscope
Using the quick-release coupling Simultaneously press the two control elements of the quick-release coupling and
insert the endoscope
(3)
with the eyepiece into the receptacle of the quick-re-
lease coupling ( A ). The connection with the endoscope is made automatically by
releasing the two control elements of the quick-release coupling ( B ) (Fig. 4-2
"Open and close quick-release coupling").
Fig. 4-1 Connecting lens to a C-mount
camera
Fig. 4-2 Open and close quick-release
coupling
(1)
Camera
(2) Video lens
(3)
Endoscope
(1)
(2)
(3)