Argantix KDC 100-100, User Manual

Page: 50 / 137

User Manual
40 KDC Series II DC Power Supplies
4.2.7 Registers Menu
The registers menu provides access to the non-voltage setup storage of the DC power supply. A
total of 8 front panel setups can be stored in registers numbered from 0 through 7. Each register
can hold the complete front panel setup, including the programmed transient list. This allows for
quick recall of different setups and transient programs.
One of the setup registers can be assigned as the power on default setting for the KDC power
supply. This is accomplished from the Configuration menu. See section 4.2.8.
ENTRY DESCRIPTION
SAVE REG 0 - 7 Recalls the selected setup and transient list
from memory. The left knob (VOLTAGE) may
be used to scroll through the available list of
setup register numbers.
Use the ENTER key to perform the save
operation
RECALL REG 0 - 7 Saves the selected setup and transient list to
memory. The left knob (CURRENT) may be
used to scroll through the available list of
setup register numbers.
Use the ENTER key to perform the recall
operation
Note: When operating the KDC power supply as an auxiliary unit in a multi box
configuration, do not recall settings that were saved while the KDC was in
Master (normal) mode as this may invalidate the auxiliary settings. This is
especially important if a register is assigned to the power on default
setting.