Argantix KDC 100-100, User Manual

Page: 40 / 137

User Manual
30 KDC Series II DC Power Supplies
4.2.2 Top Level Menu
The top level or Level 1 menu can always be reached by pressing the MENU key. There are more
than two entries at this level so the up down cursor keys must be used to scroll through all
available entries. To enter a particular menu, scroll to the desired entry. The selected entry is
marked by a "

" marker. Once the marker is on the desired entry, press the ENTER key to
select.
The entries that are available at this level are as follows:
ENTRY DESCRIPTION
PROGRAM Main output setting control for voltage, current and OVP mode.
The voltage and current control screen can also be called up
directly by pressing the SET key.
CONTROL Selects operating modes, internal or external reference and
other settings.
MEASUREMENT Selects the measurement screen. This screen can also be
called up directly by pressing the MEAS button.
TRANSIENT Selects the transient data entry and execution screens.
REGISTERS Selects the front panel setup registers.
CONFIGURATION Selects the various configuration screens that determine
settings for remote control interfaces, IEEE address (if
installed), power on register, control mode and elapsed time.
OUTP CAL Selects the output calibration screen.
MEAS CAL Selects the measurement calibration screen.
ETIME / TEMP Selects the elapsed time information and internal temperate
read out status screen.
LIMITS Selects the voltage and current range configuration limits
screen. This screen is for information purposes only and
cannot be edited.