APPEAR AS
Confidential
217/352
Channel Number
This number is the actual number assigned to a channel for the viewer.
Visible
Each logical channel has a checkbox associated with it, which represents the
visibility state of the channel.
The default value of this flag is visible.
Select the specifier to be used from the selection box. To add channel already configured on the output, select
Import Local Services
. Then all the services currently configured on output will be listed and it is possible to edit
the channel numbers directly. For services not handled by this unit or pre-configure a service that will be added
later, click on
and manually insert all data required for each service.
To modify an existing setup, simply change the channel number or click
to remove an existing channel number
entry.
If the service re-multiplexing layout changes, this configuration needs to be updated manually
(e.g. if a service is added or removed).
When selecting Digital Europe, this will enable support for HD Simulcast descriptor by clicking on Check box before
HD Simulcast seen in figure below.
It is possible to add all configured output services to this list be clicking on the Import Local Service and it will
import all data as shown in below.
8.6.5
E
DITING THE
BAT
TABLE
When a bouquet has been defined it is possible to add services to the bouquet. It is then possible to add the
services with the software package for the respective STB’s.
