APPEAR AS
Confidential
143/352
Aspect Ratio
Aspect Ratio of the outgoing stream. Choose from 4:3, 16:9, or Transparent.
AR Conversion
Aspect Ratio Conversion refers to the method of converting the incoming
MPEG stream to suit the video output
–
valid choices are Pan Scan,
Letterbox (default), Combined, and Off.
AR Conversion provides options regarding the video aspect ratio output of
the decoder when the source is widescreen (16:9).
AR Conversion will be added to the incoming picture if the input format is
different from the output format. For example:
o
SD output
–
if the incoming format is 16:9, then AR Conversion is
applied because the output format is 4:3.
o
HD output
–
if the incoming format is 4:3, the AR Conversion is applied
because the output format is 16:9.
AR Conversion
Standard
Aspect Ratio Conversion Standard refers to the method in which the
decoder is being told what the incoming picture looks like
–
the options are Normal, DTG, and AFD Manual.
The chosen standard affects the AR Conversion and WSS value.
Signal Standard
Video signal standard
–
this parameter is not configurable for the HP RF
Decoders as it is defined by the firmware installed on the Decoder module.
Luma Filter ( RF
Decoder only)
This option enabled the output picture to be filtered/softened.
•
0 sharp /off
•
1
•
2
•
3
•
4
•
5
•
6
•
7 Very soft
AR Conversion Standard
Description
Normal
The selected AR Conversion is used. WSS value:
Source is Aspect Ratio from video stream.
