APPEAR AS
Confidential
85/352
Here the output will configure an SRT listener on port 20000. The input will configure an SRT caller on port 30000
and will try to connect to the IP address 10.10.10.123 on port 20000.
The features presented here are as following:
Mode
Select SRT mode: Caller, Listener or Rendezvous
IP Address
Specify the IP address
Source Port
This will be the port from which SRT will send video data
Destination Port
Select port which SRT should try to connect to
Encryption Mode
Type of encryption: ON or OFF
Passphrase
The password. Minimum length is 10 characters
Receive latency
Set the latency input buffer. Gives time to the SRT to do retransmission on lost
packets
The SRT module is limited by the CPU, thus in most cases the bitrate will limit the number of
SRT connections. Recommended total bitrate for an SRT card is 35 Mbps for both input and
output with full 256 AES encryption.
Higher bitrate then the recommended value will increase the risk of CC error and triggering of
the high CPU load alarm.
If total the bitrate is kept bellow the recommended value, then the SRT card supports 32 inputs
and 32 outputs.
