APPEAR AS
Confidential
178/352
8.3.3
EMM
The
EMM
tab makes it possible to add EMM streams inserted by the CA server via the unit’s scrambling module
-
if one or more scrambler modules are present in the unit- by selecting the desired EMM(s) from
Available EMMs
and clicking on the appropriate arrow to move it to
Selected EMMs
.
Available EMMs
A list of EMMs received from the CA server via the unit’s scrambling card,
configurable under:
Conditional
Access
→
SCS
→
EMMG/PDG
; multiple
EMMs may be added.
Additionally, there is a
Passthrough
option.
For IP SPTS, only the option to enable it will be available, as shown in the figure below.
Activating this option will enable an incoming service to be transmitted with its original CA including EMM and
CAT without being descrambled in the unit, so that receivers further down the chain can carry out the
descrambling process instead
For IP MPTS and any other output module, the
Passthrough
option will require also to select from which input
the EMM will be passed through in the “
Choose EMM Source
” drop
-down menu, as shown in the figure below:
The EMM(s) and CAT present in that source will be imported into the output MPTS.
EMM
Passthrough
For IP SPTS, enables an incoming service to be transmitted with its original CA
including EMM and CAT without being descrambled in the unit, so that receivers
further down the chain can carry out the descrambling process instead.
For output MPTS, passes the EMM(s) and CAT present in the selected EMM Source
into the MPTS.
