APPEAR AS
Confidential
172/352
By removing the “Auto All Services” node all the
services from that input will be removed.
In conjunction with an ‘Auto All’ service, i
t is possible to add additional local or other programs in the normal way,
ie drag and drop to the MPTS node.
Service ID clashes are not automatically handled when usi
ng a combination of ‘Auto All’ and
additional services.
8.2.2
C
ONFIGURING AN OUTPUT WITH
SID
CONFLICT MODE
It is possible to resolve SID conflicts on adding output with below methods.
Reject
This will reject the adding if one or more of the services has a service id which
is already present in the MPTS
Auto
This will use the Auto-SID mode
Resolve on conflict
If one or more of the services has a service id which is already present in the
MPTS, we will show the Service Id dialog.
Always resolve
It will always show the Service Id dialog when service(s) are added to a MPTS
8.3
T
RANSPORT
S
TREAM
G
ENERATION
To begin generating MPTS outputs, we set the
Transport
related parameters via the
Edit Multiplex
5
dialog,
accessible by double clicking on the MPTS.
The procedure for adding services/multiplexes varies according to the type of module.
For non-IP modules, services are added to the output stream by dragging and dropping. This method is possible
because entries in the
Output
panel already exist for these modules, corresponding to their physical ports. The
Default Stream Properties
panel for these modules is used for adding new services.
For IP modules, output multiplexes can be added by entering appropriate values in the
Default Stream
Properties
panel and clicking
Add MPTS
(if MPTS license installed).
The figures below show the different Default Stream Properties panels for these modules.
5
For ASI, COFDM, and QAM modules, “Multiplex” is replaced with the module type.
