APPEAR AS
Confidential
280/352
To configure each service, select the service name from the drop down box. Ensure the
RF
Enable
check box is
unchecked.
To configure individual outputs, click
Edit
. The resulting user interface is displayed in the figure below.
Depending on the choice of RDS mode, the page will display different options.
Under
Radio
, the following parameters are available:
RF Enable
Enable or disable RF modulation
Current Service
Displays the selected service; not configurable in this screen
Backup Source
Choose a backup source from the drop down box
Switching Mode
Choose one of the following:
•
Off
•
Once
•
Floating
•
Reverting
RF Frequency (MHz)
The output frequency of the particular service
Audio level
adjustment (dB)
The output audio level can be adjusted to achieve the desired deviation.
Adjustments between 12 and -12 dB can be made in 0.5 dB steps.
Audio clipping per
second
This is a read-only parameter giving an indication of digital clippings per second;
ideally its value should be 0 if the audio level is adjusted correctly.
Descrambler
The descrambler that may be used to descramble the input device before it is sent
to the radio card for decoding.
Language
Select a language from the drop down box
