APPEAR AS
Confidential
313/352
Then the user can insert members by drag & drop. It is allowed to drag & drop existing outgoing SPTS into a new
group too.
The group edit popup should have the following fields:
Name
Group Name for GUI presentation purposes only
Redundancy control
Enable if the user wants to use the output group to control Output
Redundancy. Choose then one of the following options:
All
–
The streams in the group are signaled to be faulty if all of the
outgoing services in the group are faulty
Majority
–
The streams in the group are signaled to be faulty if the
majority of the outgoing services in the group are faulty.
One
–
The streams in the group are signaled to be faulty if one of the
outgoing services in the group are faulty
Manual
–
No automatic operation will occur.
12.3.5
S
TREAM SPECIFIC SETTINGS
When the global redundancy attributes are defined, output redundancy must be enabled for all outgoing
streams. When enabled the output redundancy will monitor the stream status and if any errors perform the
appropriate action.
Depending on the configuration, the results of an alarm trigger would be:
•
Send an OSPF to the next hop router and announces that the source is no longer present.
o
Note that the multicast will still be transmitted.
o
Note that in an multicast system it is the source that is disabled, which means if multiple
outputs are given the same source address then both/all streams will be regarded stopped
by the router.
