Appear TV DC100 Series Product User Manual Download Page 164

Page: 164 / 352

APPEAR AS

Confidential

164/352

Add/Remove the channels on which you want the message to appear, using the arrow buttons between the

Available

and the

Show on

fields. The channels will then be listed in the

Show on

textbox. Only one

Message Text can be displayed at a given channel at a time. Selected channels will be removed from the

Available

textbox.

Write the message to be displayed in the Message Text box. This message can contain up to 255 ASCII
characters.

Select the vertical position by choosing Top or Bottom.

Select the message appearance

–

either Scrolling or Fixed.

Speed can be either

Medium

Slow

Background can be

solid

transparent

Check Enable OSD Messaging to activate the message. Otherwise, the message will be disabled until you
enable it.

Click Submit to register the message.

Summary of Contents for DC100 Series

































































































































































































































































































































































Search results

Summary of Contents for DC100 Series

Reviews:

Related manuals for DC100 Series

Brands by name

Popular brands

Appear TV DC100 Series, Product User Manual

Search results

Summary of Contents for DC100 Series

Reviews:

Related manuals for DC100 Series

Brands by name

Popular brands