APPEAR AS
Confidential
46/352
Refer to Section 0 for information on how to configure the decoder.
3.5.9
FM
R
ADIO
O
UTPUT
The FM radio module has built-in FM modulation and up-conversion to the FM band. Its FM up-converted output
is a female F connector.
Each module is one slot wide and can offer up to eight channels. The FM output can cover the complete band
from 87.5MHz to 108MHz. All eight channels are combined into a female 75 Ω F connector.
The options to enable RDS or insert RDS information, as well as enable outside management are presented in
the GUI.
The RF output can be muted with an external system by applying 5V to the mute connector. Muting the input
mutes all channels available on the RF output connector.
3.5.10
DVB-T/T2
O
UTPUT
The DVB-T/T2 output module has 4 50 Ohm BNC outputs, two for output A and two for output B. Both outputs
have a RF and Test port. The RF port will output the level configured in the system while the Test port will be 20
dB lower and can be used for monitoring.
3.5.11
DVB-S/S2/S2X
O
UTPUT
There are three variations of the DVB-S/S2 output module:
•
DVB-S/S2 L-Band Output
–
This module has two SMA RF outputs (50 Ohm), one for each of the output
channels A and B, and two monitor ports which are F-Type connectors (75 Ohm). The RF level of the
monitor ports is 20 dB below that configured in the GUI for the RF outputs.
The RF output can be muted with an external unit by applying 5V to the mute connector. Channel A and
Channel B can be muted individually. The connector for Mute is a 2.5 mm headphone jack. For more
information on this functionality, contact Appear
’s Support Team.
