APPEAR AS
Confidential
107/352
Select file type
Can be set to Local (local file on USD card), or NAS (networked attached
storage).
Label
Text label to identify the contents of this TS file.
Select a file
Select a file for TS insertion. When more than one file is uploaded, the list
will contain several files ready for playout.
PCR Pid
Leave unchecked for automatic PCR detection. May be used to force a
specific PCR, if multiple PCR pids are present
Rewrite PCR
When checked, PCR/PTS and CC fields will be re-written at every loop point
to hide the discontinuity at the TS loop point
Analyze Mode
Can be set to (Off, DVB, DVB SDT, MPEG, ATSC, DVB Test, DVB Non-
Compliant) to select the PSI/SI system for the TS file to be inserted.
Playout
Can be set to Play (loop) or Stop. When set to Stop, the TS file will be
configured and ready for playout, but playout does not start. When set to
Play (loop), playout will start and loop at the end of the TS file.
5.5.2
SCP
UPLOAD
For large files (50MB+) web upload may be slow, and SCP upload is a better alternative.
In order to upload, connect to the control port/MMI IP address with an SCP client. All TS files must be uploaded
to the "/mnt/mmc/staged" folder
using the ‘asio’ user
. An example command would be as follows:
scp recording.ts [email protected]:/mnt/mmc/staged/recording.ts
Once a file has been uploaded here it will appear in the "Local file" list using the "Adding a file" procedure as
described above.
5.5.3
NAS
PLAYOUT
When adding a file from an external network attached storage (NAS), the Select file type must be set to NAS. The
external NAS server must be reachable from the control port on the switch module. The add file dialog will then
change to reflect that a NAS file source shall be added:
