Altigen ACM 6.5, Administration Manual, Page: 353 / 502

MAXCS ACM 6.5 Administration Manual 339
Opening Enterprise Manager
To open Enterprise Manager, use one of the following methods:
•
For a single-system installation without a Domain Master, this first method is
recommended. From MaxAdmin, select
VoIP > Enterprise Network
Management . Enterprise Manager opens without a login dialog box.
•
For multisite VoIP domain management, from the Windows Start menu, select All
Programs > MAXCS > Enterprise Manager . A login screen appears. (With this
method you can log in to the Domain Master from any member system or remote
desktop.)
WARNING!
If your MAXCS system is using dynamic IP addressing, you will see the
following warning message when launching Enterprise Manager.
Please check the Internet Protocol (TCP/IP) Properties of your server
NIC interface and assign a fixed IP address to this server.
User name Password Login Domain Via Server
DomainAdmin
(Logging in as
DomainAdmin gives you
rights to change the entire
Enterprise Manager
configuration.)
Default=22222. You can
change the password in
Enterprise Manager:
Note : This password is not
the same as the MaxAdmin
password.
Enter the domain master’s IP
address
Admin@domain master IP
address
(A Site Admin who logs into
the Domain Master in this way
has the same rights as
DomainAdmin.) Enter MaxAdmin password Enter the domain master’s IP
address
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.) Enter the MaxAdmin
password for the member
server Enter the member server’s IP
address