Rockwell Automation Publication 2198-UM004A-EN-P - October 2019
139
Configure the Drive with KNX5100C Software
Chapter 7
From the Operation Mode Selection List
To select an operation mode setting, perform the following steps.
1.
Use the pull-down menu to select an operating mode setting.
When you choose a new operation mode setting, the following message
appears.
From the Setting Page
To change the operation mode setting, perform the following steps.
1.
From the Function List, select Start > Kinetix 5100 > Settings.
TIP
If you click Yes, a power cycle is triggered.
If you click No, you are returned to the Settings view without a power
cycle. However, a reminder appears until you initiate a power cycle.
IMPORTANT
Parameter ID117 (P1.001), ControlMode, is valid only after power cycle.
Summary of Contents for Kinetix 5100 2198-E1004-ERS
Page 499: ......