110
Rockwell Automation Publication 2198-UM004A-EN-P - October 2019
Chapter 6
Set Up EtherNet/IP Communication
2.
In the Device Information screen or Drive Status screen, the current IP
address is shown.
3.
Press
key.
SETTING appears on the display.
4.
Press
key.
NET SETTING scrolls across the display.
5.
Press
key.
STATIC IP scrolls across the display.
To enter the IP ADDR, press
key, and use the keys to enter the IP
Address octets.
To enter the SUBNET, press
key, and use the keys to enter the
subnet address octets.
To enter the GATE, press
key, and use the keys to enter the
Gateway octets.
Press
to return to the Static IP display.
6.
Press
key.
DHCP appears on the display.
To show the current DHCP setting (OFF or ON), press
key.
To change the DHCP setting, and press
or
key.
The display toggles between OFF and ON.
To apply the setting, press
key or to exit the setting press
keypad.
See
for help with setting the network
parameters
Drive
Status
Device
Information
Version
Information
Setting
Information Display/Setup Mode
Summary of Contents for Kinetix 5100 2198-E1004-ERS
Page 499: ......