Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 63 / 168

Rockwell Automation Publication 1440-UM001D-EN-P - September 2016 63
Chapter
2
Configure the XM-124 Standard Dynamic
Measurement Module
The XM-124 module is configured by using the XM® Serial Configuration
Utility software. This section details the configuration process and associated
parameters.
XM Serial Configuration
Utility Software The Serial Configuration Utility tool is provided for local configuration of any
XM® Series module, except for the 1440-DYN02-01RJ Dynamic
Measurement module, which is used exclusively with and configured from a
Logix controller. The tool is available on the Rockwell Automation® Support
for XM website:
http://www.rockwellautomation.com/global/support/firmware/xm.page .
The Serial Configuration Utility, versions 7.0 and later, includes support for
the XM-124 standard dynamic measurement module.
The Serial Configuration Utility is a Microsoft Windows-based program that
you can use to configure XM modules via the local serial port (usually the
micro connector on the top of the module). You can also use the tool to enable
reading and writing of configuration files, display measurement data, and
update module firmware.
Application Help
At any time, you can press the F1 function key to access the online help
function for the application. When opened, the Help function presents
information relative to the tab currently being viewed.
Topic Page
XM Serial Configuration Utility Software 61
Configuring the XM-124 Standard Dynamic Measurement Module 65