Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 101 / 168

Rockwell Automation Publication 1440-UM001D-EN-P - September 2016 101
Chapter
3
Operate the Module
Module Inputs
The XM-124 module accepts eddy current transducer signals, accelerometer
signals, and voltage signals from dynamic measurement sensors such as those
from velocity or pressure transducers. A tachometer input is also provided.
Module Outputs The XM-124 module provides an active buffer for each of the vibration
transducer inputs. The module also provides a resistive buffer for the
tachometer input, and two isolated, analog 4…20 mA outputs independently
programmed to represent any measured parameter for the two transducer
inputs.
The two 4…20 mA outputs are independently programmed to represent any
measured parameter from either channel. Isolation is 250V between channels
and to other circuits.
Topic Page
Module Inputs 101
Module Outputs 101
Modes 102
Reset Switch 103
XM Services 104
Invalid Configuration Errors 105
XM-124 Module I/O Message Formats 105
IMPORTANT The module has a 300 ohm maximum load.