Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 120 / 168

118 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Appendix B CIP Objects
Identity Object
(Class Code 01
H
)
The Identity Object provides identification and general information about the
device.
Class Attributes
The Identity Object provides no class attributes.
Instance Attributes
Status
The Status is a 16-bit value. Table 33 lists the bits that are implemented.
Table 32 - Identity Object Instance Attributes
Attribute ID Access Name Data Type Default Value
1 Get Vendor ID UINT 1 = A/B
2 Get Device Type UINT 109 (Specialty I/O)
3 Get Product Code UINT 73
4 Get Revision:
Major
Minor
STRUCT OF USINT
USINT
Value varies with each firmware reversion.
Value varies with each firmware reversion.
5 Get Status WORD
6 Get Serial Number UDINT
7 Get Product Name SHORT_
STRING XM-124 standard dynamic measurement module
Table 33 - Identity Object Status
Bit Name Description
0 Owned TRUE indicates that the module has an owner. More specifically, the Predefined Master/Slave Connection Set has
been allocated to a master.
1 — Reserved, set to 0
2 Configured This bit is set whenever a saved configuration is successfully loaded from nonvolatile memory. This bit is cleared
whenever the default configuration is restored or loaded.
3 — Reserved, set to 0
4 …7 Extended Device Status
8 Minor Recoverable Fault Set whenever there is a transducer or tachometer fault.
9 Minor Unrecoverable Fault Not implemented
Self-testing or unknown 0
Firmware update in progress 1
At least one faulted I/O connection 2
No I/O connections established 3
At least one I/O connection in Run mode 6
At least one I/O connection, all in Run mode 7