Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 57 / 168

Rockwell Automation Publication 1440-UM001D-EN-P - September 2016 57
Install the XM-124 Standard Dynamic Measurement Module Chapter 1
Switches 5…10 - Set DeviceNet Address
Follow these steps to set the node address.
1. See DeviceNet Node Addresses on page 59 for the switch settings of a
specific address.
2. Using a pointed tool, slide switches 5…10 to the appropriate positions (1
or 0).
EXAMPLE If you want the node address to be 4, then set DIP switches 5…8 as
follows.
Down Position = 0