Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 136 / 168

134 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Appendix B CIP Objects
Instance Attributes
42 No Band 1 Spectrum Option USINT 0 = Standard Spectrum
1 = gSE Spectrum 0
43 No Band 2 Spectrum Option USINT 0
44 No Band 3 Spectrum Option USINT 0
45 No Band 4 Spectrum Option USINT 0
46 No Band 5 Spectrum Option USINT 0
47 No Band 6 Spectrum Option USINT 0
48 No Band 7 Spectrum Option USINT 0
49 No Band 8 Spectrum Option USINT 0
50 No Eccentricity 1 Update Rate USINT 1…255 seconds 60
51 No Eccentricity 2 Update Rate USINT 1…255 seconds 60
(1) Alarms 6…15 are not available when the module is configured in the RSLogix 5000 software.
(2) The Poll Connection Produced Connection Path and Size parameters cannot be set while the Poll connection is already established with a master/scanner. Attempting to do so results in an Object State
Conflict error (error code 0xC). These Parameter instances are slightly more flexible than the actual Connection Object attributes because they can be set while the connection is in the non-existent
state (before the master/scanner allocates the connection).
Table 56 - Parameter Object Instances (Continued)
Instance Read
Only
Name Data Type Valid Values Default Value
Table 57 - Parameter Object Instance Attributes
Attribute
ID Access Rule Name Data Type Description Semantics
1 Set Parameter Value Actual value of parameter See Table 56 for a list of valid values for each instance.
2 Get Link Path Size USINT Size of Link Path 0 (These Parameter instances do not link directly to
another object attribute.)
3 Get Link Path ARRAY of
DeviceNet path DeviceNet path to the object for the
Parameter value.
Segment Type/Port BYTE See DeviceNet Specification Volume 1
Appendix I for format.
Segment Address See DeviceNet Specification Volume 1
Appendix I for format.
4 Get Descriptor WORD Description of Parameter Bit 0 = Settable Path support
Bit 1 = Enum Strings support
Bit 2 = Scaling support
Bit 3 = Scaling Links support
Bit 4 = Read Only
Bit 5 = Monitor
Bit 6 = Ext. Prec. scaling
5 Get Data Type EPATH Data Type Code See DeviceNet Specification Volume 1 Appendix J,
Section J-6.
6 Get Data Size USINT Number of Bytes in Parameter value.