Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 28 / 168

28 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Chapter 1 Install the XM-124 Standard Dynamic Measurement Module
Figure 8 - XM-940 Terminal Base Unit
Terminal Block Assignments
The terminal block assignments for the XM-124 standard dynamic
measurement module are described in this section.
ATTENTION: The terminal block assignments are different for
different XM modules. Table 2 on page 29 applies only to the XM-124
module.
See the installation instructions for the specific XM module for its
terminal assignments.
TIP The XM module revision number is on the product label (which is on the
front of the XM module, as shown in this image).
WARNING: Explosion Hazard. Do not disconnect connections to this
equipment unless power has been removed or the area is known to
be nonhazardous. Secure any external connections that mate to this
equipment by using screws, sliding latches, threaded connectors, or
other means provided with this product.
XM-940 (catalog number 1440-TB-A)
Row A
Row B
Row C
Revision Number of
XM Module