Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 145 / 168

Rockwell Automation Publication 1440-UM001D-EN-P - September 2016 143
CIP Objects Appendix B
Services
Overall Measurement
Object (Class ID 322
H
)
The Overall Measurement Object models the measurement of the amplitude
of a signal including a wide frequency range.
Class Attributes
The Overall Measurement Object provides no class attributes.
Instances
There are two instances of this object.
Table 70 - Device Mode Object Services
Service Code Class/Instance Usage Name Description
0E
h
Instance Get_Attribute_Single Return the value of one attribute.
10
h
Instance Set_Attribute_Single Set the value of one attribute.
07
h
Instance Stop Transitions from Run to the Program state.
06
h
Instance Start Validate the device configuration settings and transition to the Run state if OK.
05
h
Instance Reset Transition to the Power Up state. Load the nonvolatile configuration and
transition to the Run state if saved configuration restored.
16
h
Instance Save Validate the device configuration settings if necessary and save them to
nonvolatile memory.
09
h
Instance Delete Delete the saved configuration from nonvolatile memory.
15
h
Instance Restore Load the saved configuration or the factory default configuration from
nonvolatile memory.