When you install the N4916A for the first time, you need to configure
the USB interface of the Serial BERT.
For this configuration, you may wish to connect a keyboard and a mouse
to the Serial BERT (see
“Connecting Peripherals” on page 399
). This is
not mandatory but convenient – the keys provided by the instrument
can be used as well for entering the required information. You can
remove keyboard and mouse when you are done.
Checking the Serial BERT Software Revision
The Serial BERT software supports the N4916A on from revision 4.8.
1
Switch on the Serial BERT.
2
In the
Help
menu, click
About
.
3
If the software revision is below 4.8, you need to update the software
(see
“Updating the Software” on page 397
).
Checking the Agilent IO Libraries Revision
New Serial BERT instruments are delivered with Agilent IO Libraries
Suite Revision 14.1 or later installed. However, the N4916A can also be
operated with the older revision M.01.
1
In the
Utility
menu, click
Minimize GUI
to access the Windows
operating system.
2
Click the
Agilent IO Control
icon in the Windows task bar to open the
IO Control menu.
9
Customizing the Instrument
408
Agilent J-BERT N4903 High-Performance Serial BERT
Summary of Contents for J-BERT N4903
