AEMC OX7102-CII, User Manual

Page: 89 / 208

Oscilloscope Mode - The "Utilities" Menu
SCOPIX Oscilloscopes IV - 89
Oscilloscope Mode (contd.)
Configuration
Date/time
Updating of the date (day, month, year) and the time (hour, minute, second).
You can select the required parameter by using the stylus and the scrollbars
located on either side of the parameters to be adjusted.
The clock starts when the menu is closed.
Langue
(Language)
Selection of the language in which the menus are written.
Options available:
French, English, German, Italian, Spanish, etc.
Screen saver Sets the screen to standby after a defined period of time to minimize the
consumption of the equipment and screen ageing.
4 options are available:
15mins, 30mins, 1hr, no standby mode.
The screen can be reactivated by pressing any key on the front panel.
Standby
Shutdown of the instrument after a predefined period, in order to limit its energy
consumption.
In this case, the equipment configuration is saved before the shutdown.
4 options are available:
30 mins, 1 hr, 4 hrs, 24 hrs
The equipment is reactivated using the key shown opposite or using a key on
the front panel, which will not be taken into account.
•
The “ ” symbol indicates the selected option.
•
The option can be modified using the stylus.
Validation of the selections by "OK". Exit from the menu without modification
by "Cancel".
System info
Display of data concerning the operation of the instrument since it was first
used.
Selftest This list displays the result of the self-test activated when the instrument is
switched on.
For verification of the instrument, see §. Maintenance.
Calibration of the
touch-sensitive screen The tactile screen needs to be calibrated if the position of the mouse pointer
is offset from the stylus impact point on the tactile screen or if access to x
different objects on the screen is difficult.
This calibration process is described on P. 45, 46.