AEMC OX7102-CII, User Manual

Page: 195 / 208

Technical Specifications
Technical Specifications
« Multimeter » Function Only the values assigned with a tolerance or limits are guaranteed
values (after half an hour warming up). Values without a tolerance
are for information only.
Resistance measurement
On Channel 1
Ranges (end of scale) Ohmmeter Resolution Measuring current
80
Ω
0.01
Ω
0.5 mA
800
Ω
0,1
Ω
0.5 mA
8 k
Ω
1
Ω
5 µA
80 k
Ω
10
Ω
5 µA
800 k
Ω
100
Ω
500 nA
8 M
Ω
1000
Ω
50 nA
32 M
Ω
10 k
Ω
50 nA
Accuracy ± 0.5 % + 25 D from 10 % to 100 % of scale
Open circuit voltage
≈
3 V
Continuity measurement On Channel 1
Beeper
< 30
Ω
± 5
Ω
Measuring current
≈
0.5 mA
Beeper response < 10 ms
Diode test
On Channel 1
Voltage
in open circuit :
≈
+ 3.3 V
Accuracy 0.5 % + 5 D
Measuring current
≈
0.6 mA
Display 4,000 counts in voltmeter
Input impedance
1 M
Ω
Max. input voltage 600 Vrms sinus and 800 V
DC
, without probe
1000 Vrms et 1400 V
DC,
with HX0030 probe
Floating max. voltage 600 Vrms up to 400 Hz CAT III, 1000 V CAT II
DC measurement HX0030 probe
Ranges 0.4 V 4 V 40 V 400 V 800 V 8 kV
Resolution 0.1 mV 1 mV 10 mV 0.1 V 1 V 1 V
Accuracy 0.5 % ± 5 D in DC from 10 % to 100 % of scale
Common mode rejection > 70 dB at 50 or 60 or 400 Hz
AC, AC+DC measurements HX0030 probe
Ranges 0.3 V 3 V 30 V 300 V 600 Vrms sinus 6 kVrms
0.4 V 4 V 40 V 400 V 800 Vpeak
8 kV
DC
Resolution 0.1 mV 1 mV 10 mV 0.1 V 1 V 1 V
Accuracy with AC+DC
coupling
1 % ± 15 D from DC to 5 kHz from 10 % to 100 % of scale (to 580 Vrms)
2 % ± 15 D from 5 to 10 kHz
id.
3 % ± 15 D from 10 to 200 kHz id.
AC 1 % ± 15 D from 40 Hz to 5 kHz id.
2 % ± 15 D from 5 to 10 kHz id.
3 % ± 15 D from 10 to 200 kHz id.
Common mode rejection > 70 dB at 50 or 60 or 400 Hz
SCOPIX Oscilloscopes X - 195