AEMC OX7102-CII, User Manual

Page: 121 / 208

Recorder Mode - Keys
Recorder Mode (cont’d)
5 "VERTICAL" keys
(or keypads)
OX 7104
Stage 1 Stage 2 Stage 3
SCOPIX Oscilloscopes VII - 121
OX 7102
or
D eselecting the signal: 2 short taps on the key concerned (see opposite).
A long press does not trigger a vertical autoset. After a long press the
message: “Impossible in this mode!” appears.
This key enables or disables the horizontal dividing into 2 parts of the
display area (see “Oscilloscope” mode).
No action.
(Pressing the key displays the message: “Impossible in this mode!”).
In “Recorder” mode, the DC input coupling is constant. The DC symbol
is permanently displayed.
To set the vertical sensitivity of the last channel selected (see “Oscilloscope”
mode).
To set the vertical position of the last channel selected (see “Oscilloscope”
mode).
Before pressing one of the
keys shown opposite:
After pressing one of these
keys:
The signal concerned is not
displayed. The signal is displayed and
selected.
The vertical sensitivity and
vertical position are allocated
to the selected channel.
The signal concerned is
displayed but not selected.
Press
The signal is erased by
The signal concerned is
double pressing.
displayed and selected.
Stage 1 Stage 2 Stage 3
Before pressing one of the
keys shown opposite:
After pressing one of these
keys:
The signal concerned is not
displayed. The signal is displayed and is
selected.
On CH1 and CH4, the vertical
sensitivity and vertical position
are allocated to the selected
channel.
The signal concerned is
displayed, but not selected.
Press
The signal is erased by
double pressing.
The signal concerned is
displayed and selected.