AEMC OX7102-CII, User Manual

Page: 38 / 208

Oscilloscope Mode - The Keys
IV - 38 SCOPIX Oscilloscopes
Oscilloscope Mode (cont'd)
Definition of terms
used
Validated channel: Display enabled, trace displayed after RUN
Displayed channel: Channel validated, trace present on the screen
Selected channel: The parameters of this channel can be set with the keys:
5 "VERTICAL" keys
or key pads
OX 7104
OX 7102
A long press on one of the keys CHx causes a vertical autoset:
•
This modifies the sensitivity and vertical positioning of the channel in
question.
•
It optimizes the display on the screen by activating and selecting the
channel.
The channel is displayed and selected.
and
Step 1 Step 2 Step 3
Before pressing one of the
following keys :
After pressing one of the
preceding keys:
The channel concerned is
not displayed. The channel is displayed and
selected.
The vertical sensitivity and
vertical position are assigned
to the channel selected.
The channel concerned is
displayed, but not selected. The channel is selected.
The channel concerned is
displayed and selected.
Press
The channel is cancelled by
double-pressing.
Step 1 Step 2 Step 3
Before pressing one of the
following keys :
After pressing one of the
preceding keys:
The channel concerned is
not displayed. The channel is displayed and
selected.
On CH1 and CH4, the vertical
sensitivity and the vertical
position are assigned to the
channel selected.
The channel concerned is
displayed, but not selected. The channel is selected.
The channel concerned is
displayed and selected.
Press
The channel is cancelled by
double-pressing.