AEMC OX7102-CII, User Manual

Page: 191 / 208

Technical Specifications
Technical Specifications (cont'd)
Accessories
Probix
These specifications apply to following PROBIX and
development.
HX0030 - 1/10 Probe 1/10 probe equipped with a LED and programmable control
buttons
Measurement categories 600V CAT III, 1000V CAT II
Accuracy
± 1% (V
DC
)
Bandwidth DC at 250 MHz
Input capacity 15 pF
Compensation range 12 pF to 25 pF
Rise time 1.2 ns
Input impedance 10 M Ω at 1%
DERATING see curve opposite
HX0031 - BNC
Probix for BNC cable connection
Measurement category 600V CAT III, 1000V CAT II
Accuracy ± 1 % (V
DC
)
Bandwidth 250 MHz
HX0032 - BNC 50 Ω
50 Ω Probix for BNC cable connection
Measurement category 600V CAT III, 1000V CAT II
Max. output 2 W max. (i.e 10 V
DC
on 50 Ω )
Accuracy ± 1 % (V
DC
)
Bandwidth 250 MHz
HX0033 - Banana
Probix for connection to ‘banana’ type cables
Measurement category 600V CAT III, 1000V CAT II
Accuracy ± 1 % (V
DC
)
DERATING 20 dB/decade for F >100 kHz
HX0034 - Current clamp
20 mV/A Current clamp 80 A peak, AC/DC
Measurement category 600V, CAT II
Accuracy ±1.5% ±2 mA from 0 to 45 A peak
± 4 % from 45 to 80 A peak
Bandwidth 500 kHz @ -1dB, 1 MHz @ -3dB
8 A max. @ 0.5 MHz (*)
Rise time 350 ns from 10% to 90%
DERATING 40 A max. @ 100 kHz
4 A max. @ 1 MHz
Phase error ± 1°
Output voltage for
≤
± 0.3 mV
DC
i.e. ± 15 mA
DC
(*) Ip = 0
With the HX0034 current clamp, the service voltage between
channels becomes 600V CAT II.
SCOPIX Oscilloscopes X - 191