AEMC OX7102-CII, User Manual

Page: 95 / 208

Multimeter Mode - The Keys
Multimeter Mode (cont'd)
3 "MEASURE" keys
No action.
For changing the reference trace to which the cursor refers (successive presses).
No action.
3 "HORIZONTAL" keys
or key pads
Duration of the recording in the display window: > 5m, 15m, 30m, 1h, 6h, 12h,
24h, week, month.
No action.
•
If the instrument is equipped with the "EXTENDED ACQUISITION MEMORY"
option:
Pressing on this key will display the last 2,700 measurements on the curve
and pressing again will display the 27,000 acquisition memory measurements.
•
If the instrument is not equipped with this option, this key will not have any
effect.
5 "VERTICAL" keys
or key pads
The instrument contains as many independent multimeters as there are
channels in "Oscilloscope" mode (2 or 4).
Same function as in "Oscilloscope" mode.
A long press enables or disables the autorange on the channel concerned.
The channel is displayed and selected.
No action.
If a channel is activated and selected, this key can be used to change the input
coupling of the channel. By successive presses, the coupling can be changed
from AC to DC to AC+DC.
The coupling is indicated in the multimeter window of the channel concerned.
When selected for ohmmeter, continuity or capacimeter measurements,
component testing or temperature measurements on channel 1, the key has no
effect, as the input coupling in these functions cannot be adjusted.
Manual modification of the measurement range.
If the autorange mode is activated, the manual adjustment has no effect: the
autorange will automatically reset the instrument to the measurement range
best suited to the input signal.
No action.
SCOPIX Oscilloscopes V - 95