AEMC OX7102-CII, User Manual

Page: 162 / 208

Applications
Applications (cont’d)
•
Select the trigger mode:
Trig. Menu Automatic mode
or using the SGLE REFR key.
•
Use the RUN HOLD key to start acquisition (RUN mode)
or use the time base menu.
The acquisition status (Ready, RUN, STOP) is indicated on the right, under Reminder
er status display zone. the display of the trace, in the trigg
•
Optimize the time base speed to observe several complete TV lines.
Example of a video signal
Use the manual cursors to check the duration of a line
IX - 162 SCOPIX Oscilloscopes
•
the key opposite.
•
To move the cursors freely, select:
M sors.
•
Use the stylus to position cursors 1 and 2 on the start and end of the
duration of a line
Display the manual cursors:
Menu Measure Manual measurements (dt, dv)
or using
easure Menu Unattached cur
signal, respectively.
The measurements between the 2 cursors are indicated under the curve
display.
Example: dt = 64.00 µs =