AEMC OX7102-CII, User Manual

Page: 123 / 208

Recorder Mode - Display
Recorder Mode (cont’d)
1. Status area Three pieces of general information appear in this area:
•
The bargraph, representing the screen position and the cursors in the
acquisition memory;
•
Instrument settings (fault capture mode, zoom, etc.);
•
Acquisition times:
of the first sample that can be viewed,
of the sample under the main cursor,
of the sample under the auxiliary cursor.
Standard
configuration
Configuration if
delayed start-up is
enabled
When the acquisition starts, the display returns to its standard configuration.
Time of acquisition of 1st
sample viewable in the
displayed window
Time of acquisition of
sample located under
the main cursor
Time of acquisition of sample
located under the auxiliary
cursor
Screen position in the
acquisition memory
Position of main/auxiliary
cursors in the acquisition
memory
Display in fault capture
mode
Zoom active
1
10:23:10 13:23:25 17:14:20
The curves displayed
are stored in the
memory
Move to the left in
the acquisition
memory
Move to the
right in the
acquisition
memory
2
SCOPIX Oscilloscopes VII - 123
1
10:23:10
------------ ------------
Delayed start-up time
2