AEMC OX7102-CII, User Manual

Page: 84 / 208

Oscilloscope Mode - The "Memory" Menu
IV - 84 SCOPIX Oscilloscopes
Oscilloscope Mode (cont'd)
Recall .TRC When selected, this opens a "File Copy" menu.
In the "Source" list, the .TRC files previously saved (via the menu "Trace Save
.TRC") are displayed.
Select the file to be called up from the list displayed.
∗
Choose the destination from the "Destination" list.
∗
The destination trace selected is called up in the input zone.
∗
This key triggers call-up of the trace.
The menu can be exited without recalling by tapping the icon in the top right-
hand corner with the stylus.
•
If you wish to recall in one action all the traces memorized jointly, open
corresponding ".MAC" file via menu "UTIL"
"Fichier" (File).
•
If the destination trace selected is already present on the screen, it will be
overwritten by the trace called up.
•
When a trace is recalled, Mx appears in the destination trace parameters.
•
The virtual keyboard cannot be used in this menu.
Configuration
Saving or recall of an instrument configuration.
Save When selected, this opens the "File copy" menu.
∗
The "Configuration" object is automatically selected in the "Source" list.
∗
A back-up file name is proposed above the Qwerty keyboard.
The key deletes the character preceding the cursor in this area.
∗
A default save filename is proposed above the keyboard, generated from the
date and current time. It can be modified via the virtual keyboard using the
stylus.
The key deletes the character preceding the cursor in this area.
You can exit from this menu without saving by tapping with the stylus on the icon
in the top right-hand corner of the window.
•
The filename is limited to a maximum of 20 char extension. If this rule
is not observed, the message: 'Filename too long’ is displayed.
•
If the name already exists or is incompatible, an error message will appear
•
By moving the pointer onto the names of the files, you will see their
characteristics displayed (date and time saved and size).
Recall When selected, this opens the "File Copy" menu.
In the "Source" list, the .CFG files saved (via the menu "Configuration
Save")
are displayed.
A particular file that is always present called "Default Config" contains the
instrument's default configuration.
Select the file to be called up from the "Source" list.
This key triggers call-up of the configuration.
The virtual keyboard cannot be used in this menu.