manualshive.com logo in svg

Activant Dimensions, Getting Started, Page: 23 / 490

Share
Download
Activant Dimensions Getting Started Download Page 23

 

Chapter 1. Hardware Training

 

 Printer 

 

This peripheral device allows information such as reports, Point of Sale 

transactions, and checks to be printed on paper or special forms.  There are 3 

ways a printer could be hooked up to the computer: 

Parallel

  This is hooked up directly to the main computer and is known as the 

system printer.  It is usually port #90 and any port on the system can print 

to it.  It is connected with a heavy round cord.  

Serial

  This is an addressable printer, meaning it is assigned a port number and 

can be addressed (printed to) from any port on the system.  It is connected 

with an RJ45 connector and a flat cable.  

Slave

  This is a non-addressable printer (it is not assigned a port number) but is 

physically attached to a terminal or PC.  Only that terminal can print to it.  

A slave printer can print the information showing on the terminal screen 

from which it is slaved, otherwise known as a “screen dump.”  

 

There are many different kinds of printers.  Here are examples of the common 

printers Dimensions uses. 

Dimensions of Okidata 320/520
       6.00" high
     17.00" wide
     14.50" deep

 

 

Dimensions of Okidata 3410
 (not including stand)
       8.00" high
     24.25" wide
     16.00" deep

 

Dimensions of Laser Printer
       6.50" high
     17.50" wide
     17.00" deep

Dimensions 14 

15

 

Summary of Contents for Dimensions











































































































































































































































































































































































































































































































Reviews:

No comments